|
I design this necklace so that either end, the one with the dangle drop or the end with the straight set of beads can be used as the front
of the necklace.
This photo is of the dangle drop end.
|
Material list for this end of the necklace is:
Silver plated 2.8mm link chain cut into 10 link lengths
Silver plated 2 inch flat ended head pins in each bead set
4mm Silver plated soldered closed jumpring used at the intersection of the dangle drop and the two beginning bead sets
The dangle is:
Silver plated 1.5 inch flat ended head pin
Four silver plated 2mm x 1mm tube cut spacer beads
Two silver color 4mm open work round spacer bead
Two silver color 6mm open work round spacer bead
10mm dark amethyst Czech Republic glass bead
|
Material list continued for photo on left:
First set of glass beads are:
Silver plated 2.0 inch flat ended head pin (with head cut off and two end eyepins formed after placing on beads)
Four silver plated round spacer beads
Two 4mm two-tone (amethyst and crystal clear) Czech Republic glass beads
One 6mm two-tone (amethyst and crystal clear) Czech Republic glass bead
The set of beads with 10mm dark amethyst glass bead is:
Silver plated 2.0 inch flat ended head pin (with head cut off and two end eyepins formed after placing on beads)
Two silver plated round spacer beads
Two silver color 4mm open work round spacer bead
Two silver color 6mm open work round spacer bead
10mm dark amethyst Czech Republic glass bead
|
